User's Manual

Chapter 36 Schedules
ZyWALL USG 20/20W User’s Guide
571
(see Section 36.2 on page 568), and click either the Add icon or an Edit icon in
the Recurring section.
Figure 338 Configuration > Object > Schedule > Edit (Recurring)
The Year, Month, and Day columns are not used in recurring schedules and are
disabled in this screen. The following table describes the remaining labels in this
screen.
Table 170 Configuration > Object > Schedule > Edit (Recurring)
LABEL DESCRIPTION
Configuration
Name Type the name used to refer to the recurring schedule. You may use 1-
31 alphanumeric characters, underscores(_), or dashes (-), but the first
character cannot be a number. This value is case-sensitive.
Date Time
StartTime Specify the hour and minute when the schedule begins each day.
Hour - 0 - 23
Minute - 0 - 59
StopTime Specify the hour and minute when the schedule ends each day.
Hour - 0 - 23
Minute - 0 - 59
Weekly
Week Days Select each day of the week the recurring schedule is effective.
OK Click OK to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving your changes.