User's Manual

Chapter 8 L2TP VPN Example
ZyWALL USG 2000 User’s Guide
202
1 Click Start > Settings > Network and Dial-up connections > Make New
Connection. In the wizard welcome screen, click Next.
Figure 196 Start New Connection Wizard
2 Select Connect to a private network through the Internet and click Next.
Figure 197 New Connection Wizard: Network Connection Type
3 Enter the domain name or WAN IP address configured as the My Address in the
VPN gateway configuration that the ZyWALL is using for L2TP VPN. Click Next.
Figure 198 New Connection Wizard: Destination Address
172.16.1.2