User's Manual

Chapter 10 Wireless LAN
WAP3205 User’s Guide
109
10.7 Wireless LAN Advanced Screen
Use this screen to allow wireless advanced features, such as the output power,
RTS/CTS Threshold and high-throughput physical mode settings.
Click Network > Wireless LAN > Advanced. The screen appears as shown.
Figure 64 Network > Wireless LAN > Advanced
Policy Define the filter action for the list of MAC addresses in the MAC Address
table.
Select Disable to deactivate the MAC filtering rule you configure below.
Select Allow to permit access to the WAP3205, MAC addresses not listed
will be denied access to the WAP3205.
Select Reject to block access to the WAP3205, MAC addresses not listed
will be allowed to access the WAP3205
Add a
station Mac
Address
Enter the MAC addresses of the wireless station that are allowed or denied
access to the WAP3205 in these address fields. Enter the MAC addresses in
a valid MAC address format, that is, six hexadecimal character pairs, for
example, 12:34:56:78:9a:bc.
MAC Filter Summary
Delete Click the delete icon to remove the MAC address from the list.
MAC
Address
This is the MAC address of the wireless station that are allowed or denied
access to the WAP3205.
Apply Click Apply to save your changes back to the WAP3205.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 33 Network > Wireless LAN > MAC Filter
LABEL DESCRIPTION