User's Manual

Chapter 7 Connection Wizard
WAP3205 User’s Guide
67
Wireless Security: WPA-PSK/WPA2-PSK
Choose WPA-PSK or WPA2-PSK security in the Security mode field to set up a
password for your wireless network.
Figure 37 Wireless Security: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
Table 23 Wireless Security: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION
Wireless
Network
Name
(SSID)
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
If you change this field on the WAP3205, make sure all wireless stations
use the same SSID in order to access the network.
Security
mode
Choose WPA-PSK or WPA2-PSK security to configure a Pre-Shared Key.
Choose this option only if your wireless clients support WPA-PSK or WPA2-
PSK respectively.
Wireless
password
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most
secure wireless connection by configuring WPA in the wireless LAN screens.
Verify
Password
Retype the password to confirm.
Exit Click this to close the wizard screen without saving.
Back Click this to return to the previous screen.
Next Click this to continue.