User's Manual

Chapter 9 Configuring the DMA
DMA-1000 Series User’s Guide
66
Figure 36 OPTION > Settings for Ease of Use
The following table describes the fields in this menu.
9.13 Reset Settings
Use this menu to set the DMA back to the factory default settings.
V You will lose all of your changes when you reset to the default settings.
Select OPTION > Reset Settings to open the following menu.
Table 19 OPTION > Settings for Ease of Use
LABEL DESCRIPTION
Connect to last
accessed server
automatically
When the DMA starts up, this option has it automatically connect to the media
server that you last used.
A check mark appears next to the option if it is selected.
Connect to single
server/USB
automatically
When the DMA starts up, this option has it automatically connect to the media
server or USB device that you last used.
A check mark appears next to the option if it is selected.
Resume last
screen from
standby
If you were playing a file when you turned off the DMA, this option has the DMA
automatically continue playback from where you left off when you turn the DMA
back on.
A check mark appears next to the option if it is selected.
Sound effect Set how loud you want the DMA to beep when you press buttons on the remote
control.
OK Select this to save your changes back to the DMA.
CANCEL Select this to exit this screen without saving your changes.