User's Guide

Chapter 11 Wireless LAN
EMG3435-Q20A User’s Guide
107
Fig ure 71 Expert Mode > Wireless > MAC Filter
The following table describes the labels in this menu.
11.6 Adva nc e d Sc re e n
Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold
settings.
Click Expe rt Mo de > Wire le ss > Adva nc e d. The screen appears as shown.
Table 33 Expert Mode > Wireless > MAC Filter
LABEL DESCRIPTIO N
Band Select the frequency band to set whether you want to apply the wireless and security settings to
the default 2.4G Hz or 5G Hz wireless LAN.
SSID Select This shows the SSID for which you are configuring MAC filtering.
MAC Address
Filter
Select to turn on (Ena ble ) or off (Disa ble ) MAC address filtering.
Filter Action Define the filter action for the list of MAC addresses in the MAC Filte r Summa ry table.
Select Allo w to permit access to the EMG3435-Q20A, MAC addresses not listed will be denied
access to the EMG3435-Q20A.
Select De ny to block access to the EMG3435-Q20A, MAC addresses not listed will be allowed to
access the EMG3435-Q20A.
MAC Filter Summary (Max Limit : 64)
# This is the index number of the MAC address. Select Auto De te c tio n to automatically detect the
MAC address of the wireless station that are allowed or denied access to the EMG3435-Q20A.
Otherwise, select Use r de fine to enter the MAC address of the wireless station in the MAC Addre ss
field that are allowed or denied access to the EMG3435-Q20A.
MAC Address This field displays the MAC address of the wireless station. If you select Use r d e fine in the # field,
enter the MAC address(es) manually.
Add/Delete Click to add the rule in the MAC filter summary table.
Click to remove a rule.
Apply Click Ap ply to save your changes back to the EMG3435-Q20A.
Cancel Click C a nc e l to reload the previous configuration for this screen.