User's Guide
Table Of Contents
- EMG3435-Q20A
- User’s Guide
- Technical Reference
- Status
- WAN
- Wireless LAN
- LAN
- Applications
- Security
- Maintenance
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 12 LAN
EMG3435-Q20A User’s Guide
113
Fig ure 76 LAN and WAN IP Addresses
The LAN parameters of the EMG3435-Q20A are preset in the factory with the following values:
• IPv4 address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 128 client IPv4 addresses starting from 192.168.1.33.
These parameters should work for the majority of installations.
12.4 LAN IP Sc re e n
Use this screen to change the IP address for your EMG3435-Q20A. Click Expe rt Mo de > LAN > LAN IP.
Fig ure 77 Expert Mode > LAN > LAN IP
The following table describes the labels in this screen.
Table 37 Expert Mode > LAN > LAN IP
LABEL DESCRIPTIO N
IP Address Type the IP address of your EMG3435-Q20A in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your EMG3435-
Q20A will automatically calculate the subnet mask based on the IP address that you assign.
Unless you are implementing subnetting, use the subnet mask computed by the EMG3435-
Q20A.