User's Guide

Chapter 12 LAN
EMG3435-Q20A User’s Guide
115
12.6 IPv6 LAN Sc re e n
Use this screen to configure the IP address for your EMG3435-Q20A on the LAN. Click Expe rt Mo d e > LA N
> IPv6 LAN.
Fig ure 79 Expert Mode > LAN > IPv6 LAN
The following table describes the labels in this screen.
Table 39 Expert Mode > LAN > IPv6 LAN
LABEL DESCRIPTIO N
LAN IPv6 Address Assignment
Enable_DHCPv6-PD
Select this option to use DHCPv6 prefix delegation. The EMG3435-Q20A will obtain an IPv6 prefix from the ISP or a
connected uplink router for the LAN.
Autoconfiguration
Type
Select SLAAC + RDNSS to enable IPv6 stateless auto-configuration on this interface. The
interface will generate an IPv6 IP address itself from a prefix obtained from an IPv6 router in
the network.
Select SLAAC + Sta te le ss DHC Pv6 to enable IPv6 stateless auto-configuration on this
interface. The interface will get an IPv6 address from an IPv6 router and the DHCP server. The
IP address information gets through DHCPv6.
Select Sta te ful DHC Pv6 to allow a DHCP server to assign and pass IPv6 network addresses,
prefixes and other configuration information to DHCP clients.
IPv6 Address range
(Start)
Enter the beginning of the range of IP addresses that this address object represents.
IPv6 Address range
(End)
Enter the end of the range of IP address that this address object represents.
IPv6 Lifetime Enter the IPv6 lifetime in the LAN.
Static IP Address
Select this option to manually enter an IPv6 address if you want to use a static IP address.
LAN IPv6 Address Enter the LAN IPv6 address you want to assign to your EMG3435-Q20A in hexadecimal
notation.