User's Guide

Chapter 13 Applications
EMG3435-Q20A User’s Guide
123
Fig ure 83 Expert Mode > Applications > Parental Control > Notification
The following table describes the fields in this screen.
Table 43 Expert Mode > Applications > Parental Control > Notification
LABEL DESCRIPTIO N
General
E-mail
Notification
Select Ena b le to activate e-mail notifications.
Add new rules Click this if you want to configure a new parental monitor rule.
Notification Rules
# This shows the index number of the rule.
Status This indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active.
User Name This shows the name of the user to which this rule applies.
Notification This shows the e-mail address to which the notification is sent.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the De le te icon to delete an existing rule.
Email Notification Configuration
Mail Server Select the mail server. Otherwise, select Use rDe fine d and manually specify the mail server
address and the port of the mail server.
Mail Server
Address
Type the name or IP address of the outgoing SMTP server.
Mail Server Port Enter the same port number here as is on the mail server for mail traffic.
Authentication
Username
Type the user name to provide to the SMTP server for authentication when the notification is e-
mailed.
Authentication
Password
Type the password to provide to the SMTP server for authentication when the notification is e-
mailed.
Mail From Type the e-mail address from which the outgoing e-mail is delivered. This address is used in
replies.