User's Guide

Chapter 13 Applications
EMG3435-Q20A User’s Guide
131
Fig ure 92 Expert Mode > Applications > File Sharing > SAMBA
The following table describes the labels in this screen.
Table 48 Expert Mode > Applications > File Sharing > SAMBA
LABEL DESCRIPTIO N
SAMBA Setup
Enable SAMBA Select this to enable file sharing through the EMG3435-Q20A using Windows Explorer or by
browsing to your work group.
Name Specify the name to identify the EMG3435-Q20A in a work group.
Work Group You can add the EMG3435-Q20A to an existing or a new workgroup on your network. Enter
the name of the workgroup which your EMG3435-Q20A automatically joins. You can set the
EMG3435-Q20A’s workgroup name to be exactly the same as the workgroup name to
which your computer belongs to.
Note: The EMG3435-Q20A will not be able to join the workgroup if your local area
network has restrictions set up that do not allow devices to join a
workgroup. In this case, contact your network administrator.
Description Enter the description of the EMG3435-Q20A in a work group.
Require username
and password
Select Ye s to need a user account for access to the connected USB stick from any
computer. Otherwise, select No .
User Accounts Before you can share files you need a user account. Configure the following fields to set up
a file-sharing account.
# This is the index number of the user account.
Enable This field displays whether a user account is activated or not. Select the check box to
enable the account. Clear the check box to disable the account.
User Name Enter a user name that will be allowed to access the shared files. You can enter up to 20
characters. Only letters and numbers allowed.
Password Enter the password used to access the shared files. You can enter up to 20 characters. Only
letters and numbers are allowed. The password is case sensitive.