User's Guide

Chapter 13 Applications
EMG3435-Q20A User’s Guide
133
13.6.3 Exa m ple o f Ac c e ssing Your Sha re d File s Fro m a Co m pute r
You can use Windows Explorer or FTP to access the USB storage devices connected to the EMG3435-
Q20A.
This example shows you how to use Microsoft’s Windows XP to browse your shared files. Refer to your
operating system’s documentation for how to browse your file structure.
Use Windo ws Explo re r to Sha re File s
You should have enabled file sharing and create a user account (Bob/1234 for example) with read and
write access to USB 1 in the Applic a tio ns > File Sha ring > SAMBA screen.
Open Windows Explorer to access the connected USB device using either Windows Explorer browser or
by browsing to your workgroup.
USB1/USB2 Specify the user’s access rights to the USB storage device which is connected to the
EMG3435-Q20A’s USB port.
Re a d & Write - The user has read and write rights, meaning that the user can create and edit
the files on the connected USB device.
Re a d - The user has read rights only and can not create or edit the files on the connected
USB device.
No ne - The user cannot access the files on the USB device(s) connected to the USB port.
Upstream
Bandwidth
Enter the maximum bandwidth (in Kbps) allowed for incoming FTP traffic.
Downstream
Bandwidth
Enter the maximum bandwidth (in Kbps) allowed for outgoing FTP traffic.
Apply Click Apply to save your changes back to the EMG3435-Q20A.
Cancel Click C a nc e l to begin configuring this screen afresh.
Table 49 Expert Mode > Applications > File Sharing > FTP
LABEL DESCRIPTIO N