User's Guide

EMG3435-Q20A User’s Guide
14
C HAPTER 2
Intro duc ing the We b
Config ura to r
2.1 O ve rvie w
This chapter describes how to access the EMG3435-Q20A Web Configurator and provides an overview
of its screens.
The Web Configurator is an HTML-based management interface that allows easy setup and
management of the EMG3435-Q20A via Internet browser. Use a browser that supports HTML5, such as
Internet Explorer 9.0 and later versions, Mozilla Firefox 21 and later versions, Safari 6.0 and later versions or
Google Chrome 26.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in
Windows 7.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
Refer to the Troubleshooting chapter (
Chapter 16 on page 160) to see how to make sure these functions
are allowed in Internet Explorer.
2.2 Ac c e ssing the We b Co nfig ura to r
1 Make sure your EMG3435-Q20A hardware is properly connected and prepare your computer or
computer network to connect to the EMG3435-Q20A (refer to the Quick Start Guide).
2 Launch your web browser.
3 The EMG3435-Q20A is in router mode by default. Type "http://192.168.1.1 or http://myrouter" as the
website address. If the EMG3435-Q20A obtains a WAN IP address or a DNS server IP address in the same
subnet as the LAN IP address 192.168.1.1, the default LAN IP address will be changed to 10.0.0.1
automatically. See
Auto-IP Change on page 74 for more information.
If the EMG3435-Q20A is in access point, the IP address is 192.168.1.2. See
Chapter 4 on page 26 for more
information about the modes of the EMG3435-Q20A.
Your computer must be in the same subnet in order to access this website address.