User's Guide

Chapter 14 Security
EMG3435-Q20A User’s Guide
145
Add Rule Click Add Rule to save the firewall rule.
Firewall Rule
# This is your firewall rule number. The ordering of your rules is important as rules are applied in
turn.
ServiceName This is a name that identifies or describes the firewall rule.
MAC Address This is the MAC address of the computer for which the firewall rule applies.
Dest IP This is the IP address of the computer to which traffic for the application or service is
entering.
Source IP This is the IP address of the computer to which traffic for the application or service is
initialized.
Protocol This is the protocol (TC P, UDP or ICMPv6) used to transport the packets for which you want to
apply the firewall rule.
Dest Port Range This is the port number/range of the destination that defines the traffic type, for example
TCP port 80 defines web traffic.
Source Port Range This is the port number/range of the source that defines the traffic type, for example TCP
port 80 defines web traffic.
Delete Click to remove the firewall rule.
Apply Click App ly to save the settings.
Cancel Click Ca nc e l to restore your previously saved settings.
Table 52 Expert Mode > Security > IPv6 Firewall (continued)
LABEL DESC RIPTIO N