User's Guide

Chapter 15 Maintenance
EMG3435-Q20A User’s Guide
150
Click Expe rt Mo de > Ma inte na nc e > Firm wa re Upg ra de . Follow the instructions in this screen to upload
firmware to your EMG3435-Q20A.
Fig ure 102 Expert Mode > Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Note: Do not turn off the EMG3435-Q20A while firmware upload is in progress!
After you see the Firm wa re Uploa d In Pro c e ss screen, wait two minutes before logging into the
EMG3435-Q20A again.
The EMG3435-Q20A automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Fig ure 103 Network Temporarily Disconnected
After several minutes, log in again and check your new firmware version in the Sta tus screen.
If the upload was not successful, an error message appears. Click Re turn to go back to the Firm wa re
Upg ra de screen.
Table 56 Expert Mode > Maintenance > Firmware Upgrade
LABEL DESCRIPTIO N
File Path Click C ho ose File to find the location of the file you want to upload in this field.
Choose File Click C ho o se File to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Upload Click Uploa d to begin the upload process. This process may take up to two minutes.
Check for Latest
Firmware Now
Click this to check for the latest updated firmware.