User's Guide
Table Of Contents
- EMG3435-Q20A
- User’s Guide
- Technical Reference
- Status
- WAN
- Wireless LAN
- LAN
- Applications
- Security
- Maintenance
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 5 Easy Mode
EMG3435-Q20A User’s Guide
31
The following table describes the labels in this screen.
5.6.1 Wi- Fi
Use this screen to configure security for the EMG3435-Q20A's default wireless LAN. You can enter the
SSID and select the wireless security mode in the following screen. See Chapter 14 on page 140 for how
to configure wireless network.
Note: You can enable the wireless function of your EMG3435-Q20A by first turning on the WIFI
switch in the rear panel.
Fig ure 23 Easy Mode: Wi-Fi
Table 9 Easy Mode: Control Panel
ITEM DESCRIPTIO N
Wi-Fi Click this to configure wireless radio, SSID, security mode and wireless password for the
EMG3435-Q20A's default Wi-Fi network.
Refer to Section 5.6.1 on page 31 to see this screen.
Guest Wi-Fi Click this to configure wireless and wireless security settings for the guest Wi-Fi network.
Parental Control Switch O N to enable parental control, and click this to view the parental control rules.
Otherwise, switch O FF.
Refer to
Section 5.6.3 on page 33 to see this screen.
Notification Switch O N to have the EMG3435-Q20A send e-mail notifications when the user(s) is
connected to the EMG3435-Q20A for Internet access during the specified time periods.
Otherwise, switch O FF.
Refer to
Section 5.6.4 on page 34 to see this screen.
LED Switch ON to have the EMG3435-Q20A's LEDs (lights) stay lit/blinking. Otherwise, switch
O FF.