User's Guide

Chapter 5 Easy Mode
EMG3435-Q20A User’s Guide
32
The following table describes the labels in this screen.
5.6.2 G ue st Wi- Fi
This screen allows you to configure guest wireless network settings on the EMG3435-Q20A. Users
connected to the guest wireless network can access the Internet via the EMG3435-Q20A, but not other
networks connected to the EMG3435-Q20A.
See
Chapter 11 on page 93 for how to enable and set up
the guest wireless network.
Fig ure 24 Easy Mode: Guest Wi-Fi
Table 10 Easy Mode: Wi-Fi
LABEL DESCRIPTIO N
Wireless Radio Choose whether you want to apply the wireless security to 2.4G Hz, 5G Hz or Bo th wireless
radios.
Network Name
(SSID)
(Service Set IDentity) The SSID identifies the Service Set with which a wireless station is
associated. Wireless stations associating to the access point (AP) must have the same
SSID. Enter a descriptive name (up to 32 keyboard characters) for the wireless LAN.
Security Mode Select WPA 2- PSK to enable data encryption. Or Select No Se c urity to allow wireless clients to
communicate with the access points without any data encryption.
Password This field appears when you choose wither WPA2- PSK as the security mode.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Verify Password Type the password again to confirm.
Cancel Click Ca nc e l to reload the previous configuration for this screen.
Apply Click A pply to save your changes back to the EMG3435-Q20A.