User's Guide

Chapter 6 Router Mode
EMG3435-Q20A User’s Guide
36
Fig ure 28 Expert Mode: Status > System Status: Router Mode
The following table describes the labels shown in the Sta tus screen.
Table 14 Expert Mode: Status > System Status: Router Mode
LABEL DESC RIPTION
Device Information
Item This column shows the type of data the EMG3435-Q20A is recording.
Data This column shows the actual data recorded by the EMG3435-Q20A.
Host Name This is the Syste m Na me you enter in the Ma inte na nc e > G e ne ra l screen. It is for identification
purposes.
Model Number This is the model name of your device.
Firmware Version This is the firmware version.
Sys OP Mode This is the device mode (
Section 4.1.2 on page 26) to which the EMG3435-Q20A is set - Route r
Mo de .
WAN Information
MAC Address This shows the WAN Ethernet adapter MAC Address of your device.
IP Address This shows the WAN port’s IP address.
IP Subnet Mask This shows the WAN port’s subnet mask.
Default Gateway This shows the WAN port’s gateway IP address.
IPv6 Address This shows the IPv6 address of the EMG3435-Q20A on the WAN.
LAN Information