User's Guide

Chapter 6 Router Mode
EMG3435-Q20A User’s Guide
37
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
DHCP This shows the LAN port’s DHCP role - Se rve r or Disa ble .
IPv6 Address This shows the IPv6 address of the EMG3435-Q20A on the LAN.
WLAN 2.4G Information
WLAN OP Mode This is the device mode (
Section 4.1.2 on page 26) to which the EMG3435-Q20A’s wireless LAN is
set - Ac c e ss Po int Mo de .
MAC Address This shows the 2.4GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the EMG3435-Q20A in the 2.4GHz wireless LAN.
Channel This shows the channel number which you select manually.
Security This shows the level of wireless security the EMG3435-Q20A is using.
WLAN 5G Information
WLAN OP Mode This is the device mode (
Section 4.1.2 on page 26) to which the EMG3435-Q20A’s wireless LAN is
set - Ac c e ss Po int Mo de .
MAC Address This shows the 5GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the EMG3435-Q20A in the 5GHz wireless LAN.
Channel This shows the channel number which you select manually.
Security This shows the level of wireless security the EMG3435-Q20A is using.
Firewall This shows whether the firewall is enabled or not.
System Status
System Up Time This is the total time the EMG3435-Q20A has been on.
Current Date/Time This field displays your EMG3435-Q20A’s present
date and time.
System Resource
- CPU Usage This displays what percentage of the EMG3435-Q20A’s processing ability is currently used. When
this percentage is close to 100%, the EMG3435-Q20A is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.)
- Memory Usage This shows what percentage of the heap memory the EMG3435-Q20A is using.
Interface Status
Interface This displays the EMG3435-Q20A port types. The port types are: WAN, LA N and WLAN.
Status For the LAN and WAN ports, this field displays Do wn (line is down) or Up (line is up or connected).
For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or Down
when the 2.4G/5G WLAN is disabled.
Rate For the LAN ports, this displays the port speed and duplex setting or is left blank when the line is
disconnected.
For the WAN port, it displays the port speed and duplex setting if you’re using Ethernet
encapsulation. This field displays N/ A when the line is disconnected.
For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/5GHz
WLAN is enabled and N/ A when the WLAN is disabled.
Table 14 Expert Mode: Status > System Status: Router Mode (continued)
LABEL DESC RIPTION