User's Guide

Chapter 7 Access Point Mode
EMG3435-Q20A User’s Guide
45
7.4.1 Na vig a tio n Pa ne l
Use the menu in the navigation panel to configure EMG3435-Q20A features in Ac c e ss Po int Mo de .
Fig ure 34 Expert Mode: Navigation Panel: Access Point Mode
Refer to
Table 15 on page 38 for descriptions of the labels shown in the navigation panel.
7.5 LAN Sc re e n
Use this section to configure your LAN settings while in Ac c e ss Po int Mode .
Click Exp e rt Mo de > LAN to see the screen below.
Note: If you change the IP address of the EMG3435-Q20A in the screen below, you will need
to log into the EMG3435-Q20A again using the new IP address.
Rate For the LAN ports, this displays the port speed and duplex setting or is left blank when the line is
disconnected.
For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/5GHz
WLAN is enabled and N/ A when the WLAN is disabled.
Printer Information
Printer Name The EMG3435-Q20A can act as a print server and allows you to share a USB printer on your LAN.
This displays the
name of the printer connected to the EMG3435-Q20A's USB port.
Note: You need to manually install the printer driver in your computer and add the
printer to your printer list.
Table 16 Expert Mode: Status > System Status: Access Point Mode (continued)
LABEL DESC RIPTION