User's Guide

EMG3435-Q20A User’s Guide
48
C HAPTER 8
Tuto ria ls
8.1 O ve rvie w
This chapter provides tutorials for setting up your EMG3435-Q20A.
•
Set Up a Wireless Network Using WPS
• Connect to EMG3435-Q20A Wireless Network without WPS
• Using Guest SSIDs on the EMG3435-Q20A
8.2 Se t Up a Wire le ss Ne two rk Using WPS
This section gives you an example of how to set up wireless network using WPS. This example uses the
EMG3435-Q20A as the AP and NWD210N as the wireless client which connects to a notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter ).
There are two WPS methods for creating a secure connection via the web configurator or utility. This
tutorial shows you how to do both.
• Push Button C o nfig ura tion (PBC ) - create a secure wireless network simply by pressing a button. See
Section 8.2.1 on page 48. This is the easier method.
• PIN C o nfig ura tio n - create a secure wireless network simply by entering a wireless client's PIN (Personal
Identification Number) in the EMG3435-Q20A’s interface. See Section 8.2.2 on page 49. This is the
more secure method, since one device can authenticate the other.
8.2.1 Push Button C o nfig ura tio n (PBC )
1 Make sure that your EMG3435-Q20A is turned on. Make sure the WIFI button (at the back panel of the
EMG3435-Q20A) is pushed in, and that the device is placed within range of your notebook.
2 Make sure that you have installed the wireless client (this example uses the NWD210N) driver and utility in
your notebook.
3 In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Sta rt or WPS
button)
4 Log into EMG3435-Q20A’s Web Configurator and press the Push Button in the Exp e rt > Wire le ss > WPS
screen.