User's Guide

Chapter 8 Tutorials
EMG3435-Q20A User’s Guide
49
Note: Your EMG3435-Q20A has a WPS button located on its rear panel, as well as a WPS
button in its configuration utility. Both buttons have exactly the same function; you can
use one or the other.
Note: It doesn’t matter which button is pressed first. You must press the second button within
two minutes of pressing the first one.
The EMG3435-Q20A sends the proper configuration settings to the wireless client. This may take up to
two minutes. Then the wireless client is able to communicate with the EMG3435-Q20A securely.
The following figure shows you an example to set up wireless network and security by pressing a button
on both EMG3435-Q20A and wireless client (the NWD210N in this example).
Fig ure 36 Example WPS Process: PBC Method
8.2.2 PIN C o nfig ura tio n
When you use the PIN configuration method, you need to use both EMG3435-Q20A’s configuration
interface and the client’s utilities.
1 Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method to
get a PIN number.
2 Enter the PIN number to the PIN field in the Expe rt > Wire le ss > WPS screen on the EMG3435-Q20A.
Wireless Client
Access Point
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES
WPS
START