User's Guide

Chapter 8 Tutorials
EMG3435-Q20A User’s Guide
54
7 Check the status of your wireless connection in the screen below.
8 If the wireless client keeps trying to connect to or acquiring an IP address from the EMG3435-Q20A,
make sure you entered the correct security key.
If the connection has limited or no connectivity, make sure the DHCP server is enabled on the EMG3435-
Q20A.
If your connection is successful, open your Internet browser and enter
http://www.zyxel.com or the URL
of any other web site in the address bar. If you are able to access the web site, your wireless connection
is successfully configured.
8.4 Using G ue st SSIDs o n the EMG 3435- Q 20A
You can configure more than one guest SSID on a EMG3435-Q20A. See
Section 11.4 on page 104.
This allows you to configure multiple independent wireless networks on the EMG3435-Q20A as if there
were multiple APs (virtual APs). Each guest SSID has its own wireless security type. That is, each SSID on
the EMG3435-Q20A represents a different access point/wireless network to wireless clients in the
network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients using
different SSIDs can access the Internet and the wired network behind the EMG3435-Q20A (such as a
printer).