User's Guide

Chapter 11 Wireless LAN
EMG3435-Q20A User’s Guide
98
Fig ure 65 Expert Mode > Wireless
The following table describes the general wireless LAN labels in this screen.
Table 27 Expert Mode > Wireless
LABEL DESCRIPTIO N
Wireless Setup
Band Select the frequency band to set whether you want to apply the wireless and security settings
to the default 2.4G Hz or 5G Hz wireless LAN.
Wireless LAN Select Ena ble to activate the 2.4GHz and/or 5GHz wireless LAN. Select Disa ble to turn it off.
You can enable or disable both 2.4GHz and 5GHz wireless LANs by using the WIFI button
located on the rear panel of the EMG3435-Q20A.
Name (SSID) The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is
associated. Enter a descriptive name (up to 32 printable characters found on a typical English
language keyboard) for the wireless LAN.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Channel Selection Select a channel from the drop-down list box. The options vary depending on the frequency
band and the country you are in.
This option is only available if Auto C ha nne l Se le c tio n is disabled.
Operating
Channel
This displays the channel the EMG3435-Q20A is currently using.