User's Guide

Chapter 11 Network Address Translation (NAT)
EX3510-B0 User’s Guide
170
Figure 97 Port Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 58 Port Forwarding: Add/Edit
LABEL DESCRIPTION
Active Click this switch to enable or disable the rule. When the switch goes to the right , the
function is enabled. Otherwise, it is not.
Service Name Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
Obtain WAN IP
Automatically
Select the Enable check box to have the Zyxel Device automatically detect and use an
available WAN interface for port forwarding.
WAN IP Enter your WAN IP address in this field if you did not select Obtain WAN IP Automatically.
WAN Interface Select the WAN interface through which the service is forwarded.
You must have already configured a WAN connection with NAT enabled.
Note: This field is not available if you enable Obtain WAN IP Automatically.