User's Guide
Table Of Contents
- EX3510-B0
- User’s Guide
- Introducing the Zyxel Device
- Web Configurator
- Quick Start Wizard
- Tutorials
- Technical Reference
- Connection Status
- Broadband
- Wireless
- Home Networking
- Routing
- Quality of Service (QoS)
EX3510-B0 User’s Guide
38
CHAPTER 4
Tutorials
4.1 Overview
This chapter shows you how to use the Zyxel Device’s various features.
• Setting Up a Secure Wireless Network, see page 38
• Setting Up Multiple Wireless Groups, see page 45
• Configuring Static Route for Routing to Another Network, see page 49
• Configuring QoS Queue and Class Setup, see page 51
• Access the Zyxel Device Using DDNS, see page 55
• Configuring the MAC Address Filter, see page 57
4.2 Setting Up a Secure Wireless Network
Thomas wants to set up a wireless network so that he can use his notebook to access the Internet. In this
wireless network, the Zyxel Device serves as an access point (AP), and the notebook is the wireless client.
The wireless client can access the Internet through the AP.
Thomas has to configure the wireless network settings on the Zyxel Device. Then he can set up a wireless
network using WPS (Section 4.2.2 on page 40) or manual configuration (Section 4.2.3 on page 44).
4.2.1 Configuring the Wireless Network Settings
This example uses the following parameters to set up a wireless network.
SSID Example
Security Mode WPA2-PSK
Pre-Shared Key DoNotStealMyWirelessNetwork
802.11 Mode 802.11b/g/n/ax Mixed