User's Guide

Chapter 5 Connection Status
EX3510-B0 User’s Guide
63
Figure 29 System Info: Detailed Information
Each field is described in the following table.
Table 7 System Info: Detailed Information
LABEL DESCRIPTION
Host Name This field displays the Zyxel Device system name. It is used for identification.
Model Name This shows the model number of your Zyxel Device.
Serial Number This field displays the serial number of the Zyxel Device.
Firmware Version This is the current version of the firmware on the Zyxel Device.
System Up Time This field displays how long the Zyxel Device has been running since it last started up. The
Zyxel Device starts up when you plug it in, when you restart it (Maintenance > Reboot), or
when you reset it.
Interface Status
Virtual ports are shown here. You can see whether the ports are in use and their transmission rate.
WAN Information (These fields display when you have an Internet connection.)
Name This field displays the name given to the Internet connection.
Encapsulation This field displays the current encapsulation method.
IP Address This field displays the current IPv4 address of the Zyxel Device.
Click the Release button to release the IP address provided by a DHCP server. Click the
Renew button to renew the IP address. Click the Disconnect button to disconnect the PPP
WAN when PPP WAN has an IPv4 address. Click the Connect button to connect the PPP
WAN. The Web Configurator will display the loading panel until the IP address has been
released/renewed/disconnected/connected.