User's Guide

Chapter 5 Connection Status
EX3510-B0 User’s Guide
69
Each field is described in the following table.
5.5 Parental Control
Use this screen to view the number of profiles that were created for parental control.
Figure 37 Parental Control
Click the Arrow icon ( ) to open the following screen. Use this screen to enable parental control and
add more profiles. Add a profile to create restricted access schedules. Go to the Security > Parental
Control > Add New PCP/Edit screen to configure URL filtering settings to block the users on your network
from accessing certain web sites.
Table 10 Status Screen
LABEL DESCRIPTION
LAN IP Setup
IP Address Enter the LAN IPv4 address you want to assign to your Zyxel Device in dotted decimal
notation, for example, 192.168.1.1 (factory default).
Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0
(factory default). Your Zyxel Device automatically computes the subnet mask based on the
IP address you enter, so do not change this field unless you are instructed to do so.
IP Addressing Values
Beginning IP
Address
This field specifies the first of the contiguous addresses in the IP address pool.
Ending IP
Address
This field specifies the last of the contiguous addresses in the IP address pool.
DHCP Server State
DHCP Server
Lease Time
This is the period of time DHCP-assigned addresses is used. DHCP automatically assigns IP
addresses to clients when they log in. DHCP centralizes IP address management on central
computers that run the DHCP server program. DHCP leases addresses, for a period of time,
which means that past addresses are “recycled” and made available for future
reassignment to other systems.
Days/Hours/
Minutes
Enter the lease time of the DHCP server.
Save Click Save to save your changes.