Users Manual Part 1

Chapter 8 Home Networking
PX7511-B0 User’s Guide
132
8.6 STB Vendor ID
Use this screen to configure the Vendor IDs of connected Set Top Boxes (STBs) so the Zyxel Device can
automatically create static DHCP entries for them when they request IP addresses.
Click Network Setting > Home Networking > STB Vendor ID to open this screen.
Figure 71 Network Setting > Home Networking > STB Vendor ID
The following table describes the labels in this screen.
Offer Public IP
by DHCP
Click this switch to enable or disable the Zyxel Device to provide public IP addresses by DHCP
server. When the switch goes to the right , the function is enabled. Otherwise, it is not.
Enable ARP
Proxy
Click this switch to enable or disable the ARP (Address Resolution Protocol) proxy. When the
switch goes to the right , the function is enabled. Otherwise, it is not.
Cancel
Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes.
Table 34 Network Setting > Home Networking > Additional Subnet (continued)
LABEL DESCRIPTION
Table 35 Network Setting > Home Networking > STB Vendor ID
LABEL DESCRIPTION
Vendor ID 1~5 These are STB’s Vendor Class Identifiers (DHCP option 60). A Vendor Class Identifier is usually
used to inform the DHCP server a DHCP client’s vendor and functionality.
Cancel
Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes.