Users Manual Part 1

Chapter 2 The Web Configurator
PX7511-B0 User’s Guide
30
VoIP Status VoIP Status Use this screen to view VoIP registration, current call status and phone
numbers for the phone ports.
ARP Table ARP Table Use this screen to view the ARP table. It displays the IP and MAC address
of each DHCP connection.
Routing Table Routing Table Use this screen to view the routing table on the Zyxel Device.
Multicast Status IGMP Status Use this screen to view the status of all IGMP settings on the Zyxel Device.
MLD Status Use this screen to view the status of all MLD settings on the Zyxel Device.
WLAN Station
Status
WLAN Station
Status
Use this screen to view the wireless stations that are currently connected
to the Zyxel Device.
xPON Status xPON Status Use this screen to view the fiber optical transceiver’s TX power and RX
power level and its temperature.
Maintenance
System System
Use this screen to set Device name and Domain name.
User Account User Account Use this screen to change user password on the Zyxel Device.
Remote
Management
MGMT Services Use this screen to enable specific traffic directions for network services.
Trust Domain Use this screen to view a list of public IP addresses which are allowed to
access the Zyxel Device through the services configured in the
Maintenance > Remote Management > MGMT Services screen.
SNMP SNMP Use this screen to configure SNMP (Simple Network Management
Protocol) settings.
Time Time Use this screen to change your Zyxel Device’s time and date.
E-mail
Notification
E-mail
Notification
Use this screen to configure up to two mail servers and sender addresses
on the Zyxel Device.
Log Settings Log Setting Use this screen to change your Zyxel Device’s log settings.
Firmware
Upgrade
Firmware
Upgrade
Use this screen to upload firmware to your Zyxel Device.
Backup/Restore Backup/Restore Use this screen to backup and restore your Zyxel Device’s configuration
(settings) or reset the factory default settings.
Reboot Reboot Use this screen to reboot the Zyxel Device without turning the power off.
Diagnostic Ping&Traceroute
&Nslookup
Use this screen to identify problems with the Zyxel Device. You can use
Ping, TraceRoute, or Nslookup to help you identify problems.
GPON SLID Use this screen to change your Zyxel Device’s Subscriber Location ID
(SLID) setting. The SLID identifies your device to the GPON service
provider’s Optical Line Terminal (OLT).
Table 5 Configuration Menus Summary (continued)
LINK TAB FUNCTION