Users Manual Part 1

Chapter 5 Connection Status
PX7511-B0 User’s Guide
69
Figure 34 LAN
Click the Arrow icon ( ) to open the following screen. Use this screen to configure the LAN IP address
and DHCP setting for your Zyxel Device.
Figure 35 LAN Setup
Each field is described in the following table.
Table 11 Status Screen
LABEL DESCRIPTION
LAN IP Setup
IP Address Enter the LAN IPv4 address you want to assign to your Zyxel Device in dotted decimal
notation, for example, 192.168.1.1 (factory default).
Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0
(factory default). Your Zyxel Device automatically computes the subnet mask based on the
IP address you enter, so do not change this field unless you are instructed to do so.
IP Addressing Values
Beginning IP
Address
This field specifies the first of the contiguous addresses in the IP address pool.
Ending IP
Address
This field specifies the last of the contiguous addresses in the IP address pool.
DHCP Server State