Users Manual Part 2

Chapter 32 Remote Management
PX7511-B0 User’s Guide
280
The following table describes the fields in this screen.
32.3.1 Add Trust Domain
Use this screen to configure a public IP address which is allowed to access the Zyxel Device. Click the
Add Trust Domain button in the Maintenance > Remote Management > Trust Domain screen to open the
following screen.
Figure 170 Maintenance > Remote Management > Trust Domain > Add Trust Domain
The following table describes the fields in this screen.
Table 127 Maintenance > Remote Management > Trust Domain
LABEL DESCRIPTION
Add Trust Domain Click this to add a trusted host IP address.
IP Address This field shows a trusted host IP address.
Delete Click the Delete icon to remove the trust IP address.
Table 128 Maintenance > Remote Management > Trust Domain > Add Trust Domain
LABEL DESCRIPTION
IP Address Enter a public IP address which is allowed to access the service on the Zyxel Device from the
WAN. You can enter an IPv4 or IPv6 address and subnet mask or prefix length.
Cancel Click Cancel to exit this screen without saving.
OK Click OK to save your changes back to the Zyxel Device.