Users Manual Part 2

PX7511-B0 User’s Guide
301
CHAPTER 40
GPON
40.1 Overview
The Subscriber Location ID (SLID) identifies your device to the GPON service provider’s Optical Line
Terminal (OLT). If your GPON service provider gave you an SLID to use, enter it in this screen.
40.2 SLID
To change your Zyxel Device’s SLID setting, click Maintenance > GPON > SLID to open the following
screen.
Figure 188 Maintenance > GPON > SLID
The following table describes the labels in this screen.
Table 137 Maintenance > GPON > SLID
LABEL DESCRIPTION
SLID Value Enter the SLID used for gaining access to the service provider’s network. It is case-sensitive, so
make sure [Caps Lock] is not on.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes.