Users Manual Part 2

Chapter 11 Network Address Translation (NAT)
PX7511-B0 User’s Guide
169
Figure 94 Port Forwarding: Add/Edit
The following table describes the labels in this screen.
Table 57 Port Forwarding: Add/Edit
LABEL DESCRIPTION
Active Click this switch to enable or disable the rule. When the switch goes to the right , the
function is enabled. Otherwise, it is not.
Service Name Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
Obtain WAN IP
Automatically
Select the Enable check box to have the Zyxel Device automatically detect and use an
available WAN interface for port forwarding.
WAN Interface This field is NOT available if you select the Enable check box.
Select the WAN interface through which the service is forwarded.
You must have already configured a WAN connection with NAT enabled.