Users Manual Part 2

Chapter 15 Interface Grouping
PX7511-B0 User’s Guide
194
15.2.1 Interface Group Configuration
Click the Add New Interface Group button in the Interface Grouping screen to open the following
screen. Use this screen to create a new interface group. If you want to automatically add LAN clients to
a group, use filtering criteria.
Note: An interface can belong to only one group at a time.
Note: After configuring a vendor ID, reboot the client device attached to the Zyxel Device to
obtain an appropriate IP address.
Note: You can have up to 15 filter criteria.
Modify Click the Edit icon to modify an existing Interface group setting or click the Delete icon to
remove the Interface group.
Add Click this button to create a new group.
Table 73 Network Setting > Interface Grouping (continued)
LABEL DESCRIPTION