Operation Manual

Chapter 2 The Web Configurator

eircom F1000 Modem User’s Guide

After you click Connection Status, the Connection Status screen is displayed. See Chapter 3 on

page 40 for more information.

If you click Virtual Device on the Connection Status screen, a visual graphic appears, showing

the connection status of the Device’s ports. The connected ports are in color and disconnected ports

are gray.

Figure 12 Virtual Device

2.2.3 Navigation Panel

Use the menu items on the navigation panel to open screens to configure Device features. The

following tables describe each menu item.

Table 2 Navigation Panel Summary

LINK TAB FUNCTION

Connection Status This screen shows the Device’s interface and system information.

Network Setting

Broadband Broadband Use this screen to view and configure ISP parameters, WAN IP

address assignment, and other advanced properties. You can also add

new WAN connections.

3G Backup Use this screen to configure 3G WAN connection.

Advanced Use this screen to enable or disable PTM over ADSL, Annex M/Annex

J, and DSL PhyR functions.

802.1x Use this screen to view and configure the IEEE 802.1x settings on the

Device.