Operation Manual

Chapter 2 The Web Configurator
eircom F1000 Modem User’s Guide
32
Traffic Status WAN Use this screen to view the status of all network traffic going through
the WAN port of the Device.
LAN Use this screen to view the status of all network traffic going through
the LAN ports of the Device.
NAT Use this screen to view NAT statistics for connected hosts.
VoIP Status Use this screen to view VoIP registration, current call statust and
phone numbers for the phone ports.
ARP Table Use this screen to view the ARP table. It displays the IP and MAC
address of each DHCP connection.
Routing Table Use this screen to view the routing table on the Device.
IGMP/MLD
Group Status
Use this screen to view the status of all IGMP settings on the Device.
xDSL Statistics Use this screen to view the Device’s xDSL traffic statistics.
3G Statistics Use this screen to look at 3G Internet connection status.
Maintenance
User Account Use this screen to change user password on the Device.
Remote MGMT Use this screen to enable specific traffic directions for network
services.
TR-064 Use this screen to enable management via TR-064 on the LAN.
SNMP Use this screen to configure SNMP (Simple Network Management
Protocol) settings.
Time Use this screen to change your Device’s time and date.
Email
Notification
Use this screen to configure up to two mail servers and sender
addresses on the Device.
Log Setting Use this screen to change your Device’s log settings.
Firmware
Upgrade
Use this screen to upload firmware to your device.
Configuration Use this screen to backup and restore your device’s configuration
(settings) or reset the factory default settings.
Reboot Use this screen to reboot the Device without turning the power off.
Diagnostic Ping &
Traceroute &
Nslookup
Use this screen to identify problems with the DSL connection. You can
use Ping, TraceRoute, or Nslookup to help you identify problems.
802.1ag Use this screen to configure CFM (Connectivity Fault Management)
MD (maintenance domain) and MA (maintenance association),
perform connectivity tests and view test reports.
OAM Ping Use this screen to view information to help you identify problems with
the DSL connection.
WAN Diagnostics
Tests
Use this screen to perform a test on the current WAN connection and
view the result on the screen.
Table 2 Navigation Panel Summary (continued)
LINK TAB FUNCTION