Operation Manual

Chapter 13 Spanning Tree Protocol
GS1920 Series User’s Guide
135
13.10 Technical Reference
This section provides technical background information on the topics discussed in this chapter.
13.10.1 MSTP Network Example
The following figure shows a network example where two VLANs are configured on the two switches. If
the switches are using STP or RSTP, the link for VLAN 2 will be blocked as STP and RSTP allow only one link
in the network and block the redundant link.
Figure 103 STP/RSTP Network Example
With MSTP, VLANs 1 and 2 are mapped to different spanning trees in the network. Thus traffic from the
two VLANs travel on different paths. The following figure shows the network example using MSTP.
Figure 104 MSTP Network Example
A
B
VLAN 1
VLAN 2
A
B
VLAN 1
VLAN 2