Operation Manual

Chapter 39 Maintenance
GS1920 Series User’s Guide
326
39.4 Restore Configuration
Use this screen to restore a previously saved configuration from your computer to the Switch.
Figure 237 Management > Maintenance > Restore Configuration
Type the path and file name of the configuration file you wish to restore in the File Path text box or click
Choose File to locate it. After you have specified the file, click Restore. "config" is the name of the
configuration file on the Switch, so your backup configuration file is automatically renamed when you
restore using this screen.
39.5 Backup Configuration
Use this screen to save and store your current device settings.
Backing up your Switch configurations allows you to create various “snap shots” of your device from
which you may restore at a later date.
Back up your current Switch configuration to a computer using the Backup Configuration screen.
Figure 238 Management > Maintenance > Backup Configuration
Follow the steps below to back up the current Switch configuration to your computer in this screen.
1 Click Backup.
File Path Type the path and file name of the firmware file you wish to upload to the Switch in the File
Path text box or click Choose File to locate it.
Upgrade Click Upgrade to load the new firmware. Firmware upgrades are only applied after a
reboot. To reboot, go to Management > Maintenance > Reboot System and click Config 1,
Config 2 or Factory Default (Config 1, Config 2 and Factory Default are the configuration
files you want the Switch to use when it restarts).
Table 162 Management > Maintenance > Firmware Upgrade
LABEL DESCRIPTION