Operation Manual

Chapter 51 Troubleshooting
GS1920 Series User’s Guide
385
51.3 Switch Configuration
I lost my configuration settings after I restarted the Switch.
Make sure you save your configuration into the Switch’s
nonvolatile memory each time you make changes. Click Save at
the top right corner of the web configurator to save the
configuration permanently. See also Section 39.2.2 on page 323 for more information about how to save
your configuration.
I accidentally unplugged the Switch. I’m not sure which configuration file will be loaded.
If you plug the power cable back to the Switch, it’ll reboot and load the configuration file that was used
the last time. For example, if Config 1 was used on the Switch before you accidentally unplugged the
Switch, Config 1 will be loaded when rebooting.