User manual

Chapter 19 Port Security
GS2210 Series User’s Guide
169
Limited Number
of Learned MAC
Address
Use this field to limit the number of (dynamic) MAC addresses that may be learned on a port. For
example, if you set this field to "5" on port 2, then only the devices with these five learned MAC
addresses may access port 2 at any one time. A sixth device would have to wait until one of the
five learned MAC addresses aged out. MAC address aging out time can be set in the Switch
Setup screen. The valid range is from “0” to “16384”. “0” means this feature is disabled.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 66 Advanced Application > Port Security (continued)
LABEL DESCRIPTION