User manual

Chapter 24 Multicast
GS2210 Series User’s Guide
193
The following table describes the labels in this screen.
24.3.1 IGMP Snooping
Click the IGMP Snooping link in the Advanced Application > Multicast > IPv4 Multicast screen to display
the screen as shown. See Section 24.1 on page 188 for more information on multicasting.
Figure 143 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping
The following table describes the labels in this screen.
Table 78 Advanced Application > Multicast > IPv4 Multicast
LABEL DESCRIPTION
Index This is the index number of the entry.
VID This field displays the multicast VLAN ID.
Port This field displays the port number that belongs to the multicast group.
Multicast Group This field displays IP multicast group addresses.
Table 79 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping
LABEL DESCRIPTION
IGMP Snooping Use these settings to configure IGMP snooping.
Active Select Active to enable IGMP Snooping to forward group multicast traffic only to ports that
are members of that group.
Querier Select this option to allow the Switch to send IGMP General Query messages to the VLANs with
the multicast hosts attached.