User manual

ManualsBrandsZYXEL ManualsNetwork Routers & SwitchesGS2210-48HP Network RJ45/SFP switch 48 + 2 ports PoE

191

192

193

194

195

196

197

198

199

200

Chapter 24 Multicast

GS2210 Series User’s Guide

195

24.3.2 IGMP Snooping VLAN

Click Advanced Application > Multicast > IPv4 Multicast in the navigation panel. Click the IGMP

Snooping link and then the IGMP Snooping VLAN link to display the screen as shown. See IGMP Snooping

and VLANs on page 189 for more information on IGMP Snooping VLAN.

Max Group Num. Enter the number of multicast groups this port is allowed to join. Once a port is registered in the

specified number of multicast groups, any new IGMP join report frame(s) is dropped on this

port.

Throttling IGMP throttling controls how the Switch deals with the IGMP reports when the maximum

number of the IGMP groups a port can join is reached.

Select Deny to drop any new IGMP join report received on this port until an existing multicast

forwarding table entry is aged out.

Select Replace to replace an existing entry in the multicast forwarding table with the new

IGMP report(s) received on this port.

IGMP Filtering

Profile

Select the name of the IGMP filtering profile to use for this port. Otherwise, select Default to

prohibit the port from joining any multicast group.

You can create IGMP filtering profiles in the Multicast > IPv4 Multicast > IGMP Snooping > IGMP

Filtering Profile screen.

IGMP Querier

Mode

The Switch treats an IGMP query port as being connected to an IGMP multicast router (or

server). The Switch forwards IGMP join or leave packets to an IGMP query port.

Select Auto to have the Switch use the port as an IGMP query port if the port receives IGMP

query packets.

Select Fixed to have the Switch always use the port as an IGMP query port. Select this when

you connect an IGMP multicast server to the port.

Select Edge to stop the Switch from using the port as an IGMP query port. The Switch will not

keep any record of an IGMP router being connected to this port. The Switch does not forward

IGMP join or leave packets to this port.

Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these

changes if it is turned off or loses power, so use the Save link on the top navigation panel to

save your changes to the non-volatile memory when you are done configuring.

Cancel Click Cancel to begin configuring this screen afresh.

Table 79 Advanced Application > Multicast > IPv4 Multicast > IGMP Snooping (continued) (continued)

LABEL DESCRIPTION