User manual

Chapter 24 Multicast
GS2210 Series User’s Guide
205
24.5 General MVR Configuration
Use the MVR screen to create multicast VLANs and select the receiver port(s) and a source port for
each multicast VLAN. Click Advanced Application > Multicast > MVR to display the screen as shown
next.
Note: You can create up to five multicast VLANs and up to 256 multicast rules on the Switch.
Note: Your Switch automatically creates a static VLAN (with the same VID) when you create
a multicast VLAN in this screen.
To delete the profile(s) and all the accompanying rules, select the profile(s) that you want to
remove, then click the Delete button. You can select the check box in the table heading
row to select all profiles.
To delete a rule(s) from a profile, select the rule(s) that you want to remove , then click the
Delete button.
Delete Click Delete button to permanently delete the entries you selected.
Cancel Click Cancel to clear the check boxes.
Table 87 Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > Filtering Profile
LABEL DESCRIPTION