User manual

Chapter 24 Multicast
GS2210 Series User’s Guide
209
24.5.2 MVR Configuration Example
The following figure shows a network example where ports 1, 2 and 3 on the Switch belong to VLAN 1. In
addition, port 7 belongs to the multicast group with VID 200 to receive multicast traffic (the News and
Movie channels) from the remote streaming media server, S. Computers A, B and C in VLAN 1 are able
to receive the traffic.
Figure 154 MVR Configuration Example
To configure the MVR settings on the Switch, create a multicast VLAN in the MVR screen and set the
receiver and source ports.
Delete Select the entry(ies) that you want to remove, then click the Delete button to remove the
selected entry(ies) from the table.
If you delete a multicast VLAN, all multicast groups in this VLAN will also be removed.
Cancel Select Cancel to clear the checkbox(es) in the table.
Table 89 Advanced Application > Multicast > MVR > Group Configuration (continued)
LABEL DESCRIPTION