User manual

Chapter 26 IP Source Guard
GS2210 Series User’s Guide
245
26.13 IPv6 Static Binding Setup
Use this screen to manually create an IPv6 source guard binding table entry and manage IPv6 static
bindings. Static bindings are uniquely identified by the source IPv6 address / prefix. Each source IPv6
address / prefix can only be in one static binding. If you try to create a static binding with the same
source IPv6 address / prefix as an existing static binding, the new static binding replaces the original
one. To open this screen, click Advanced Application > IP Source Guard > IPv6 Static Binding Setup.
Figure 178 Advanced Application > IP Source Guard > IPv6 Static Binding Setup
VLAN This field displays the source VLAN ID in the binding. If the entry is blank, this field will not be
checked in the binding.
Port This field displays the port number in the binding. If this field is blank, the binding applies to all
ports.
Lease This field displays how many days, hours, minutes, and seconds the binding is valid; for
example, 2d3h4m5s means the binding is still valid for 2 days, 3 hours, 4 minutes, and 5
seconds. This field displays infinity if the binding is always valid (for example, a static binding).
Type This field displays how the Switch learned the binding.
S: This static binding was learned from information provided manually by an administrator.
DH: This dhcp-snooping binding was learned by snooping DHCP packets.
Table 110 Advanced Application > IP Source Guard > IPv6 Source Binding Status (continued)
LABEL DESCRIPTION