User manual

Chapter 26 IP Source Guard
GS2210 Series User’s Guide
247
Figure 179 Advanced Application > IP Source Guard > IPv6 Source Guard Policy Setup
The following table describes the labels in this screen.
26.15 IPv6 Source Guard Port Setup
Use this screen to apply configured IPv6 source guard policies to ports you specify. Use port * to apply a
policy to all ports. To open this screen, click Advanced Application > IP Source Guard > IPv6 Source
Guard Port Setup.
Table 112 Advanced Application > IP Source Guard > IPv6 Static Binding Setup
LABEL DESCRIPTION
Name Enter a descriptive name for identification purposes for this IPv6 source guard policy.
Validate Address Select Validate Address to have IPv6 source guard forward valid addresses that are stored in
the binding table.
Validate Prefix Select Validate Prefix to have IPv6 source guard forward valid prefixes that are stored in the
binding table.
Link Local Select Permit to allow data traffic from all link-local addresses; otherwise leave the setting at
Deny. A link-local address is an IPv6 unicast address that can be automatically configured on
any interface using the link-local prefix FE80::/10 and the interface identifier in the modified
EUI-64 format.
Add Click this to create the IPv6 source guard policy or to update an existing one.
Cancel Click this to reset the values above or if not applicable, to clear the fields above.
Clear Click this to clear the fields above.
Index This field displays a sequential number for each policy.
Name This field displays the descriptive name for identification purposes for this IPv6 source guard
policy.
Validate Address This field displays the Validate Address status for this IPv6 source guard policy.
Validate Prefix This field displays the Validate Prefix status for this IPv6 source guard policy.
Link Local This field displays the Link Local traffic status for this IPv6 source guard policy.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Select an entry checkbox and click Delete to remove the specified entry.
Cancel Click this to clear the check boxes above.