User manual

Chapter 37 OAM
GS2210 Series User’s Guide
324
37.3 OAM Configuration
Use this screen to turn on Ethernet OAM on the Switch and port(s) and configure the related settings.
In the OAM Status screen click Configuration to display the configuration screen as shown.
Figure 233 Advanced Application > OAM > OAM Configuration
The following table describes the labels in this screen.
Unsupported
OAMPDU Tx
This field displays the number of unsupported OAM PDUs sent on the port.
Unsupported
OAMPDU Rx
This field displays the number of unsupported OAM PDUs received on the port.
Table 157 Advanced Application > OAM Status > OAM Details (continued)
LABEL DESCRIPTION
Table 158 Advanced Application > OAM > OAM Configuration
LABEL DESCRIPTION
Active Select this option to enable Ethernet OAM on the Switch.
Port This field displays the Switch’s port number.
* Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active Select this check box to enable Ethernet OAM on this port.
Clear this check box to disable Ethernet OAM on the port.