User manual

Chapter 37 OAM
GS2210 Series User’s Guide
326
Packet Size Define the allowable packet size of the loopback test frames.
Test Click Test to begin the test.
Remote
Loopback
Mode
Port Enter the number of the port from which the Switch sends loopback control PDUs to initiate or
terminate a remote-loopack test.
Start Click Start to initiate a remote-loopback test from the specified port by sending Enable
Loopback Control PDUs to the remote device.
Stop Click Stop to terminate a remote-loopback test from the specified port by sending Disable
Loopback Control PDUs to the remote device.
Table 159 Advanced Application > OAM > OAM Remote Loopback (continued)
LABEL DESCRIPTION