User manual

GS2210 Series User’s Guide
354
CHAPTER 43
Maintenance
43.1 Overview
This chapter explains how to configure the screens that let you maintain the firmware and configuration
files.
43.1.1 What You Can Do
• Use the Maintenance screen (Section 43.2 on page 354) to upload the latest firmware.
• Use the Firmware Upgrade screen (Section 43.3 on page 357) to upload the latest firmware.
• Use the Restore Configuration screen (Section 43.4 on page 359) to upload a stored device
configuration file.
• Use the Backup Configuration screen (Section 43.5 on page 359) to save your configurations for later
use.
• Use the Auto Configuration screen (Section 43.6 on page 360) to load an auto configuration file from
a TFTP server automatically when you reboot the Switch. The Switch must have a dynamic IP address
assigned by a DHCP server.
• Use the Custom Default screen (Section 43.7 on page 361) to allow a customized default file to be
used when you reboot the Switch.
• Use the Tech-Support screen (Section 43.8 on page 363) to create reports for customer support if
there are problems with the Switch.
43.2 The Maintenance Screen
Use this screen to manage firmware and your configuration files. Click Management > Maintenance in
the navigation panel to open the following screen.