User manual

Chapter 44 Access Control
GS2210 Series User’s Guide
381
transceiver-ddm zyTransceiverDdmiTemperature
OutOfRange
1.3.6.1.4.1.890.1.15.3.84.3.1 This trap is sent when the transceiver
temperature is above or below the
normal operating range.
zyTransceiverDdmiTxPowerOutO
fRange
1.3.6.1.4.1.890.1.15.3.84.3.2 This trap is sent when the transmitted
optical power is above or below the
normal operating range.
zyTransceiverDdmiRxPowerOutO
fRange
1.3.6.1.4.1.890.1.15.3.84.3.3 This trap is sent when the received
optical power is above or below the
normal operating range.
zyTransceiverDdmiVoltageOutO
fRange
1.3.6.1.4.1.890.1.15.3.84.3.4 This trap is sent when the transceiver
supply voltage is above or below the
normal operating range.
zyTransceiverDdmiTxBiasOutOfR
ange
1.3.6.1.4.1.890.1.15.3.84.3.5 This trap is sent when the transmitter
laser bias current is above or below
the normal operating range.
zyTransceiverDdmiTemperature
OutOfRangeRecovered
1.3.6.1.4.1.890.1.15.3.84.3.6 This trap is sent when the transceiver
temperature is recovered from the
out of normal operating range.
zyTransceiverDdmiTxPowerOutO
fRangeRecovered
1.3.6.1.4.1.890.1.15.3.84.3.7 This trap is sent when the transmitted
optical power is recovered from the
out of normal operating range.
zyTransceiverDdmiRxPowerOutO
fRangeRecovered
1.3.6.1.4.1.890.1.15.3.84.3.8 This trap is sent when the received
optical power is recovered from the
out of normal operating range.
zyTransceiverDdmiVoltageOutO
fRangeRecovered
1.3.6.1.4.1.890.1.15.3.84.3.9 This trap is sent when the transceiver
supply voltage is recovered from the
out of normal operating range.
zyTransceiverDdmiTxBiasOutOfR
angeRecovered
1.3.6.1.4.1.890.1.15.3.84.3.10 This trap is sent when the transmitter
laser bias current is recovered from
the out of normal operating range.
Storm-control zyPortStormControlTrap 1.3.6.1.4.1.890.1.15.3.78.2.1 This trap is sent when storm control is
detected on a specific port. A packet
filter action has been applied on the
interface.
zuld zyZuldUnidirectionalDetected 1.3.6.1.4.1.890.1.15.3.110.3.1 This trap is sent when a unidirectional
link is detected.
zyZuldBidirectionalRecovered 1.3.6.1.4.1.890.1.15.3.110.3.2 This trap is sent when the port which is
shut down by ZULD becomes active
again.
Table 194 SNMP Interface Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION